無鹵阻燃 PA6 德國巴斯夫B3UG4 低煙度 玻纖增強20% 耐油性Ultramid? B3UG4Polyamide 6BASF Corporation20% 玻璃纖維增強材料產品說明：Ultramid B3UG4 is a 20% glass reinforced, halogen free flame retardant injection molding PA6 grade with enhanced flammability protection and low smoke density. Resistant to glow wire test GWFI to 960 degrees Celsius物性信息：基本信息黃卡編號E36632-100614963E41871-100110474E41871-233718填料/增強材料玻璃纖維增強材料, 20% 填料按重量添加劑阻燃性特性低煙度耐油性能無鹵阻燃性機構評級EC 1907/2006 (REACH)RoHS 合規性RoHS 合規形式粒子加工方法注射成型多點數據Creep Modulus vs. Time (ISO 11403-1)Isochronous Stress vs. Strain (ISO 11403-1)Isothermal Stress vs. Strain (ISO 11403-1)Secant Modulus vs. Strain (ISO 11403-1)Viscosity vs. Shear Rate (ISO 11403-2)物理性能干燥調節后的單位制測試方法密度1.31--g/cm3ISO 1183溶化體積流率（MVR） (275°C/5.0 kg)80.0--cm3/10minISO 1133機械性能干燥調節后的單位制測試方法拉伸模量 (23°C)60003000MPaISO 527-2拉伸應力 (斷裂, 23°C)95.050.0MPaISO 527-2拉伸應變 (斷裂, 23°C)3.06.0%ISO 527-2彎曲模量 (23°C)57002800MPaISO 178彎曲應力 (23°C)15070.0MPaISO 178沖擊性能干燥調節后的單位制測試方法簡支梁缺口沖擊強度ISO 179     -30°C3.4--kJ/m2ISO 179     23°C3.09.0kJ/m2ISO 179簡支梁無缺口沖擊強度ISO 179     -30°C35--kJ/m2ISO 179     23°C40110kJ/m2ISO 179熱性能干燥調節后的單位制測試方法熱變形溫度     0.45 MPa, 未退火210--°CISO 75-2/B     1.8 MPa, 未退火170--°CISO 75-2/A溶融溫度（DSC）220--°CISO 3146RTI ElecUL 746     0.710 mm65.0--°CUL 746     1.50 mm140--°CUL 746     3.00 mm140--°CUL 746RTI ImpUL 746     0.710 mm65.0--°CUL 746     1.50 mm125--°CUL 746     3.00 mm125--°CUL 746RTIUL 746     0.710 mm65.0--°CUL 746     1.50 mm140--°CUL 746     3.00 mm140--°CUL 746